SRx1 v5.00 SmartReceiver (Long Range)
Works with F16V5, F16V4, F48V4, F48, F16V3 and F4V3, F16V3 or F16V4 Differential Expansion Boards. BBB Controllers from Kulp.
Auto Protocol Detect. Replaces SmartReceiver 2.01
The SRx1 v5.0 with E-fuses is a 4-String Differential (Long Range) SmartReceiver Board that has 4 ports. Compatible with F16V5, F16V4, F48V4, F16V3, F16V3, F48 or F16V3 and F16V4 Differential Expansion Boards. All outputs have E-fuses. Fuses are resettable and can be controlled by controller to allow power to pass only when needed.
- Current, voltage, fuse status, firmware version and string properties sent back to Version 5 (V5) controllers over data wire.
- E-Fuses on all outputs, resettable, status indication on LEDS fuses as well as web UI.
- Supports 3-wire pixels only.
Works with F16V5, F16V4, F48V4, F48, F16V3 and F4V3, F16V3 or F16V4 Differential Expansion Boards.
Auto Protocol Detect. Replaces SmartReceiver 2.01
The SRx1 v5.0 with E-fuses is a 4-String Differential (Long Range) SmartReceiver Board that has 4 ports. Compatible with F16V5, F16V4, F48V4, F16V3, F16V3, F48 or F16V3 and F16V4 Differential Expansion Boards. All outputs have E-fuses. Fuses are resettable and can be controlled by controller to allow power to pass only when needed.
- All outputs have E-fuses. Fuses are resettable and can be controlled by controllers to allow power to pass only when needed.
- Current, voltage, fuse status, firmware version and string properties sent back to Version 5 (V5) controllers over data wire.
- E-Fuses on all outputs, resettable, status indication on LEDS fuses as well as web UI.
- Firmware updates through data cable. All receivers on specified chain or all chains of a controller can be updated simultaneously. 30 second update.
- TVS Diode Protection on input and output RS-485 signal lines.
Note: Supports 3-wire pixels only.
You might also like
-
![F16V4 Differential Expansion Board w/ribbon cable]()
![]()
- Out-of-Stock
-
![F16V5 Pixel Controller]()
Customers who bought this product also bought:
-
![F8-Distro with E-Fuses]()
-
![F16V4 Differential Expansion Board w/ribbon cable]()
![]()
- Out-of-Stock
-
![SRx1 PSU]()
![]()
-
![F16V2 Differential Expansion Board]()
![]()
-
![40-Pin Ribbon Cable]()
-
![F16V4 Expansion Board with ribbon cable]()
![]()
-
![F-Amp]()
- Out-of-Stock
-
![SRx2-PSU-V with E-fuses]()
Works with F16V5, F16V4, F48V4, F48, F16V3 and F4V3, F16V3 or F16V4 Differential Expansion Boards. BBB Controllers from Kulp.
Auto Protocol Detect. Replaces SmartReceiver 2.01
The SRx1 v5.0 with E-fuses is a 4-String Differential (Long Range) SmartReceiver Board that has 4 ports. Compatible with F16V5, F16V4, F48V4, F16V3, F16V3, F48 or F16V3 and F16V4 Differential Expansion Boards. All outputs have E-fuses. Fuses are resettable and can be controlled by controller to allow power to pass only when needed.
- Current, voltage, fuse status, firmware version and string properties sent back to Version 5 (V5) controllers over data wire.
- E-Fuses on all outputs, resettable, status indication on LEDS fuses as well as web UI.
- Supports 3-wire pixels only.