SRx1 V4.00 (Long Range) SmartReceiver Board
Works with F16V5, F16V3, F48, F16V4, F48V4 and F16V3 or F16V4 Differential Expansion Boards.
Auto Protocol Detect. Replaces SmartReceiver 2.01
The 4-String Differential (Long Range) SmartReceiver SRx1 Board can be connected to the F16V3, F48, F16V4, F48V4, F16V3 or F16V4 Differential Expansion Boards.
Note: Supports 3-wire pixels only.
Works with F16V5, F16V3, F48, F16V4, F48V4 and F16V3 or F16V4 Differential Expansion Boards.
Auto Protocol Detect. Replaces SmartReceiver 2.01
The 4-String Differential (Long Range) SmartReceiver SRx1 V4.00 Board can be connected to the F16V3, F48, F16V4, F48V4, F16V3 or F16V4 Differential Expansion Boards.
TVS Diode Protection.
Note: Supports 3-wire pixels only.
Can be daisy-chained together with other SmartReceiver SRx1 V4.00 (maximum six per chain). The chain will share the allocated number of pixels configured for the port it is connected to.
The SmartReceiver SRx1 V4.00 has a built in test mode that is activated by a push button. Great for testing pixels without the need of a controller. The board features four LEDS that will light respectively when data is detected on the four data lines.
Connectors Included.
Note: Supports 3-wire pixels only.
You might also like
-
![F16V4 Pixel Controller]()
-
![F16V4 Differential Expansion Board w/ribbon cable]()
![]()
- Out-of-Stock
Customers who bought this product also bought:
-
![F-Amp]()
- Out-of-Stock
-
![SRx2-PSU-V with E-fuses]()
-
![F16V2 Differential Expansion Board]()
![]()
-
![F16V4 Pixel Controller - Ready to Run]()
![]()
- Out-of-Stock
-
![F-Amp]()
-
![Falcon PiCap]()
-
![F16V2 Differential Expansion Board]()
![]()
- Out-of-Stock
-
![Powered By Falcon Sticker - 2x3.5 inch]()
![]()
Works with F16V5, F16V3, F48, F16V4, F48V4 and F16V3 or F16V4 Differential Expansion Boards.
Auto Protocol Detect. Replaces SmartReceiver 2.01
The 4-String Differential (Long Range) SmartReceiver SRx1 Board can be connected to the F16V3, F48, F16V4, F48V4, F16V3 or F16V4 Differential Expansion Boards.
Note: Supports 3-wire pixels only.